TERN
COWHIDE SPLIT LEATHER WELDER'S GLOVE / 15 CM HIDE CUFF

DESCRIPTION:
Welder's glove, American cut, wing thumb. Heat-resistant hide glove. Hide cuff. 15 cm cuff with artery protection. Total length : 35cm. Kevlar® assemblage seams.
Materials :
Heat-resistant cowhide split leather. Leather thickness: 1.2 mm to 1.4 mm. Chromium hide cuff with artery protection. Leather thickness: 1.2 mm to 1.5 mm. Kevlar® theard sewn.Ref :
TERNSIZES:
- 08
- 09
- 10
- 11
COLOURS:
Advantages |
Strong points |
Examples of use |
---|---|---|
Supple, comfortable and resistant. Flam resistant, heat resistant, and resists small weld metal spray. Abrasion, tear and perforation resistant. |
Standard Pr EN12477. VHT hide glove leather. Kevlar® sewn. 15 cm cuff with artery protection. |
Standard Pr EN12477. VHT hide glove leather. Kevlar® sewn. 15 cm cuff with artery protection. |
EN420:2003 : General requirements
|
EN388:2003 : PROTECTIVE GLOVES AGAINST MECHANICAL RISKS (LEVELS OBTAINED ON THE PALM) 4 - Resistance to abrasion (from 0 to 4) 1 - Resistance to cut (from 0 to 5) 3 - Resistance to tear (from 0 to 4) 3 - Resistance to perforation(from 0 to 4) |
|
EN407:2004 : PROTECTIVE GLOVES AGAINST HEAT & FIRE RISKS (X = UNREALIZED TEST) 4 - Resistance to flammability (from 1 to 4)1 - Resistance to contact heat (from 1 to 4) 3 - Resistance to convective heat (from 1 to 4) x - Resistance to radiant heat (from 1 to 4) 4 - Resistance to small projections of molten metal (from 1 to 4) x - Resistance to large projections of molten metal (from 1 to 4) |
EN12477:2001/A1:2005 : Protective gloves for welders